Ruijie Wi-Fi 6 Quad-Radio 11.622 Gbps High-Density Outdoor Access Point, 10Gbps SFP+ Port (RG-AP680-AR)

Rp46.514.550

Deskripsi

Specifications

Hardware Specifications

Hardware Specifications RG-AP680-AR
802.11n 14 spatial streams

●     Radio 1 – 2.4 GHz: 4×4 MIMO, four spatial streams

●     Radio 2 – 5 GHz: 4×4 MIMO, four spatial streams

●     Radio 3 – 5 GHz: 4×4 MIMO, four spatial streams

●     Radio 4 – 2.4 GHz/5 GHz: 2×2 MIMO, two spatial streams

Channels:

●     Radio 1 – 2.4 GHz: 20 MHz and 40 MHz

●     Radio 2 – 5 GHz: 20 MHz and 40 MHz

●     Radio 3 – 5 GHz: 20 MHz and 40 MHz

●     Radio 4 –2.4 GHz/5 GHz: 20 MHz and 40 MHz

Combined peak data rate: 2.1 Gbps

●     Radio 1 – 2.4 GHz: 6.5 Mbps to 600 Mbps (MCS0 to MCS31)

●     Radio 2 – 5 GHz: 6.5 Mbps to 600 Mbps (MCS0 to MCS31)

●     Radio 3 – 5 GHz: 6.5 Mbps to 600 Mbps (MCS0 to MCS31)

●     Radio 4 –2.4 GHz/5 GHz: 6.5 Mbps to 300 Mbps (MCS0 to MCS15)

Radio technologies: Orthogonal Frequency-Division Multiplexing (OFDM)

Modulation types: BPSK, QPSK, 16-QAM, 64-QAM

Packet aggregation:

●     Aggregate MAC Protocol Data Unit (A-MPDU)

●     Aggregate MAC Service Data Unit (A-MSDU)

Dynamic Frequency Selection (DFS)

Cyclic Delay/Shift Diversity (CDD/CSD)

Maximum Ratio Combining (MRC)

Space-Time Block Coding (STBC)

Low-Density Parity Check (LDPC)

Transmit beam-forming (TxBF)

802.11ac 10 spatial streams

●     Radio 2 – 5 GHz: 4×4 MIMO, four spatial streams

●     Radio 3 – 5 GHz: 4×4 MIMO, four spatial streams

●     Radio 4 – 5 GHz: 2×2 MIMO, two spatial streams

Channels:

●     Radio 2 – 5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz

●     Radio 3 – 5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz

●     Radio 4 –5 GHz: 20 MHz, 40 MHz, and 80 MHz

Combined peak data rate: 7.801 Gbps

●     Radio 2 – 5 GHz: 6.5 Mbps to 3.467 Gbps (MCS0 to MCS9)

●     Radio 3 – 5 GHz: 6.5 Mbps to 3.467 Gbps (MCS0 to MCS9)

●     Radio 4 – 5 GHz: 6.5 Mbps to 0.867 Gbps (MCS0 to MCS9)

Radio technologies: Orthogonal Frequency-Division Multiplexing (OFDM)

Modulation types: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

Packet aggregation:

●     Aggregate MAC Protocol Data Unit (A-MPDU)

●     Aggregate MAC Service Data Unit (A-MSDU)

Dynamic Frequency Selection (DFS)

Cyclic Delay/Shift Diversity (CDD/CSD)

Maximum Ratio Combining (MRC)

Space-Time Block Coding (STBC)

Low-Density Parity Check (LDPC)

Transmit beam-forming (TxBF)

802.11ax 12 spatial streams

●     Radio 1 – 2.4 GHz: 4×4 uplink/downlink MU-MIMO, four spatial streams

●     Radio 2 – 5 GHz: 4×4 uplink/downlink MU-MIMO, four spatial streams

●     Radio 3 – 5 GHz: 4×4 uplink/downlink MU-MIMO, four spatial streams

Channels:

●     Radio 1 – 2.4 GHz: 20 MHz and 40 MHz

●     Radio 2 – 5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz

●     Radio 3 – 5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz

Combined peak data rate: 10.755 Gbps

●     Radio 1 – 2.4 GHz: 8.6 Mbps to 1.147 Gbps (MCS0 to MCS11)

●     Radio 2 – 5 GHz: 8.6 Mbps to 4.804 Gbps (MCS0 to MCS11)

●     Radio 3 – 5 GHz: 8.6 Mbps to 4.804 Gbps (MCS0 to MCS11)

Radio technologies: uplink/downlink Orthogonal Frequency-Division Multiple Access (OFDMA)

Modulation types: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM

Packet aggregation:

●     Aggregate MAC Protocol Data Unit (A-MPDU)

●     Aggregate MAC Service Data Unit (A-MSDU)

Dynamic Frequency Selection (DFS)

Cyclic Delay/Shift Diversity (CDD/CSD)

Maximum Ratio Combining (MRC)

Space-Time Block Coding (STBC)

Low-Density Parity Check (LDPC)

Transmit beam-forming (TxBF)

WPA3

Antenna Wi-Fi

●     2.4 GHz: four built-in omnidirectional antennas, the max. antenna gain is 6 dBi.

●     5 GHz: eight built-in omnidirectional antennas, the max. antenna gain is 8 dBi.

Bluetooth

●     One integrated vertically polarized omnidirectional antenna, the max. antenna gain is 4 dBi.

Port 1 x 100/1000/2500/5000Base-T RJ45 Ethernet port with auto-negotiation

1 x 100/1000Base-T RJ45 Ethernet port with auto-negotiation

2 x 10GE optical ports,compatibility with 1GE and 2.5GE

1 x RJ45 console port (serial console port)

1 x Bluetooth 5.1

Status LED 1 x multi-color system status LED

●     AP power-on status

●     Software initialization status and upgrade status

●     Uplink service interface status

●     Wireless user online status

●     CAPWAP tunnel timeout

●     Specific AP locating

Three single-color signal strength LEDs:

●     Whether bridging is enabled

●     Whether bridging is successful

●     Wireless signal strength after successful bridging

Button 1 x Reset button

●     Press the button for shorter than 2 seconds. Then the device restarts.

●      Press the button for longer than 5 seconds. Then the device restores to factory settings.

Dimensions (W x D x H) Main unit: 300 mm x 300 mm x 94 mm (11.81 in. x 11.81 in. x 3.70 in.)

Shipping: 470 mm x 410 mm x 170 mm (18.50 in. x 16.14 in. x 6.69 in.)

Weight Main unit: 4.3 kg (9.48 lbs)

Mounting bracket: 1.2 kg (2.65 lbs)

Shipping: 7.18 kg (15.83 lbs)

Mounting Wall or pole-mounting (a mounting bracket is delivered with the main unit)
Input power supply The AP supports the following two power supply modes:

●     100–240 V AC power supply: The device is equipped with the RG-PL-M16-3M cable, and 1 A current must be guaranteed. The AC power supply needs to be purchased separately.

●     PoE input over ETH/PoE: The power source equipment (PSE) complies with IEEE 802.3af/at/bt standard (PoE/PoE+/PoE++).

Note: If both AC power and PoE are available, AC power is preferred.

Power consumption Maximum power consumption: 50 W

●     AC power: 50 W, 2.4 GHz radio 4×4, 5 GHz radio 4×4, LAN 2 for PoE supply

●     802.3bt (PoE++) : 50 W, 2.4 GHz radio 4×4, 5 GHz radio 4×4, LAN 2 for PoE supply

●     802.3at (PoE+) : 25 W, 2.4 GHz radio 4×4, 5 GHz radio 4×4, and Radio 3 and AI Radio disabled (LAN 2 fails to provide power for external devices )

●     802.3af (PoE) : 12.95 W (all radios do not work, and LAN 2 fails to provide power for external devices)

●     Idle mode: 10 W

Environment Storage temperature: –40°C to +85°C (–40°F to +185°F)

Storage humidity: 5% RH to 95% RH (non-condensing)

Storage altitude: < 5,000 m (16,404.20 ft.) at 25°C (77°F)

Operating temperature: –40°C to +70°C (–40°F to +158°F)

Operating humidity: 5% RH to 95% RH (non-condensing)

Operating altitude: < 5,000 m (16,404.20 ft.) at 60°C (140°F)

At an altitude between 3,000 m (9,842.52 ft.) and 5,000 m (16,404.20 ft.), every time the altitude increases by 166 m (546 ft.), the maximum temperature decreases by 1°C (1.8°F).

IP Rating IP68
Surge protection 6 kV
Mean Time

Between Failure

(MTBF)

200,000 hours (22 years) at the operating temperature of 25°C (77°F)
System memory 2 GB DRAM, 256 MB flash
Transmit power 2.4 GHz

●     Max. transmit power: 29 dBm (794.33 mW)

●     Minimum transmit power: 9 dBm (7.94 mW)

5 GHz

●     Max. transmit power: 27 dBm (501.19 mW)

●     Minimum transmit power: 7 dBm (5.01 mW)

Note: The transmit power adjusted in percentage. The transmit power is limited by local regulatory requirements.

RG-AP680-AR Wi-Fi 6 Tri-radio Access Point Datasheet.pdf